What are overhead lines?

Overhead power lines are used to transmit electricity.

Overhead lines mainly consist of:

  • overhead wires,
  • power pole,
  • equipment such as an overhead disconnector/switch, cable lashing adjusted to the line voltage, surge arresters, etc.
  • other elements depending on the use of the line.

Overhead lines can be located at different heights depending on the terrain. As a rule of thumb, the higher the voltage of the energy flowing through the overhead line, the higher the line is located.

Categories of overhead lines

Overhead lines are divided into the following categories:

  • extra-high voltage (LV) lines are those with a voltage of 200 kV and above
  • high-voltage (HV) lines are lines with a voltage of 110 kV and above,
  • medium-voltage (MV) lines are lines with a voltage of 1 to 60 kV,
  • low-voltage (LV) lines are lines with a voltage of less than 1 kV.

Considering the functions of overhead lines, we can distinguish transmission lines, distribution lines, distribution-transmission lines and lines supplying energy directly to consumers. Both the applicable standards and regulations, as well as the belonging of the line to certain categories determine its construction and details of the overall design.

Design considerations for overhead power line

When designing overhead power lines, the following main objectives are generally adopted:

  • safety - overhead system should be characterised by a high degree of safety guaranteed throughout its life,
  • compliance - with regulations covering the industry, current standards and customer standardisation guidelines,
  • certificates of conformity and type testing – issued/performed by accredited bodies,
  • quality (workmanship, components) - to ensure trouble-free operation for many years,
  • optimisation of design/construction from a technical and economic point of view.

ZPUE overhead line disconnectors

Knowledge and experience

Our overhead line disconnectors have been successfully used in overhead lines for over 30 years. ZPUE's offer includes both manually operated devices for performing basic switching operations and fully automated disconnectors and circuit breakers, which – thanks to built-in current and voltage measurement devices – allow full control of line parameters and precise detection of the location of short circuits and faults.

ZPUE flagship recloser circuit breaker and ZPUE switch disconnector

Two flagship products deserve special attention: the THO-24 series switch disconnector and the THO-RC27 series automatic circuit breaker (recloser). These devices have been honoured with many awards. They successfully operate in extensive smart grids such as SMART-GRID or FDiR, significantly increasing their efficiency and failure-free operation.

High quality of ZPUE overhead lines equipment

Monitoring market trends we use new technological solutions to constantly improve our products. We are able to adapt to current customer requirements and fulfil the provisions of large and demanding framework contracts.

We present you a comprehensive offer of our devices, prepared by a team of the best specialists. We are constantly open to any questions and suggestions, thanks to which we will be able to adjust our offer even more to your expectations.

 

Medium-Voltage/Low-Voltage Substations

A MV/LV power substation is an electrical substation where a change in the parameters of electric current takes place. This is done at different voltage levels. The most common are substations that are used to transform (change) medium voltage (e.g. 20 kV, 15 kV) to low voltage (400 V).

The second task of MV/LV transformer substations is to distribute electricity, which then goes to the end-user. A distribution substation is usually built as the last element in the path of energy supply to the customer. Such a device can be supplied from a cable or overhead line.

A MV/LV substation includes:

  • A transformer,
  • A medium-voltage switchgear,
  • A low-voltage switchgear,
  • Auxiliary elements of the structure.

The transformer changes the voltage of an electric current from higher to lower or from lower to higher. The transfer of AC energy is carried out by induction from one electrical circuit to another, while maintaining the original frequency. Although usually the electrical voltage is then changed by the transformer, an isolation transformer is an exception to this rule. The purpose of isolation transformers is to provide additional protection for the circuits being energized through galvanic separation.

Medium- and low-voltage switchgears, on the other hand, makes it possible to safely connect, interrupt, or separate electrical circuits. By means of built-in electric power protection automatics and a remote supervision system, they protect the power grid and enable its rapid reconfiguration, guaranteeing continuity in the supply of electricity.

Types of transformer substations

Due to the location and method of placement, we distinguish the following types of substations:

  • Pole-mounted transformer substations (overhead)
  • Indoor transformer substations,
  • Containerized transformer substations (small-size, urban),
  • Mobile transformer substations (transportable).

Prefabricated transformer substations

Compact substations are made in the form of a ready-made enclosure equipped with all the basic electrical equipment: transformers, MV switchgear, LV switchgear, internal installations. Such substations differ in terms of dimensions, types of housing (e.g. concrete housing, metal housing), and interior equipment. In addition, they can have external or internal service.

ZPUE substations

ZPUE S.A. has been manufacturing transformer substations for over 30 years. Experience backed by highly specialized engineering knowledge has allowed the company to create a wide range of solutions aimed at professional power, industry, renewable energy sources, as well as specialized solutions dedicated to rail transportation. The production of nearly 3,000 thousand stations per year gives ZPUE S.A. a leading position in this field in the European market. Moreover, over the years, the company has also become a well-known and trusted supply partner on the European and global markets.

Substations in concrete enclosures with an internal service corridor of the MRw-b type are prefabricated containerized substations consisting of three monolithic reinforced concrete elements made in C30/37 class: the foundation, the main body, and the roof. In the standard design, the station structure allows the insertion of encapsulated transformers with a power of up to 1000 kVA. We also offer solutions that allow the installation of units of higher power (up to 4 MVA) in various designs (oil with conservator, resin, specialized). Installation of the transformer is carried out through the door of the transformer chamber or from above after removing the roof, while its operation is carried out after opening the door to the transformer chamber.

Depending on the purpose, switchgears of our own manufacture are installed in the stations:

The above-mentioned switchgears are independent, insertable elements of station equipment, and their operation is carried out - depending on the variant of the station itself - from the inner corridor or from the outside after opening the door of a particular compartment. Connections between MV switchgear and transformer and between transformer and LV switchgear are made by cables or, optionally in special designs, by rail bridges or busways.

A transformer substation with integrated energy storage

The increase in demand for electricity in the world is growing, accumulating at certain times of the day and year. Meeting increasing energy needs involves expanding power plant capacity and transmission lines. While this leads to meeting the needs of the consumer (industrial and private), at the same time it inevitably results in the appearance of surplus power at the supplier during the night time (valley and peak energy). Similar problems are caused by an oversupply of energy generated by renewable energy source (wind and photovoltaic) power plants. The development of the electric car market creates another component of the power market, which will not be followed by the process of expanding generation infrastructure. However, balancing the power system can be carried out by investing in energy storage.

We believe that the answer to the problems aforementioned is the SPS (Smart Power Station). The main task of the device is to connect consumers to the power system through energy storage. Smart Power Station combines the functionality of a distribution substation with energy storage, RES sources, and an electric vehicle charger, managed by a single SCADA system. This innovative solution is protected by a patent application, utility model and industrial design.

This substation with integrated energy storage system was designed, manufactured, and commissioned from scratch by our engineers. The modular design allows the investor to scale the storage from a dozen kWh to several tens of MWh, also allowing control of the return to the grid or for own use (powering house, charging vehicles).

Individual approach and flexibility

Thanks to many years of experience and a team of qualified engineers, we are able to prepare solutions tailored individually to the needs of even the most demanding customers. This is evidenced by deliveries to such contractors as Innogy, ČEZ, EON, RWE, Alstom, and many others.

Subcategories

Our comprehensive offer includes a whole range of diverse low voltage switchgears, cable boxes as well as aluminium and thermosetting cubicles.

Thanks to their versatility thermosetting cubicles are widely used by the power sector, light industry and telecommunications. They are manufactured from self-extinguishing, flame-retardant insulating composite material: polyester and fibre glass. Diverse sizes allow clients to find a cubicle meeting their needs or requirements of accessories used. Along with additional elements, special design of the cubicles' construction ensures fast and comfortable installation of instruments and accessories inside of it. High resistance to weather conditions (including UV rays) allows smooth operation for many years.

You can find more information about each of the LV electrical switchgear, cubicles and other products on their pages.

From compact versions to the most efficient solutions for the power sector – each medium voltage switchgear is a complete answer to your diverse power-supply needs. Our engineers have develop a range of MV equipment, with gas or air insulation, for indoor purposes. They are flexible, offer simple maintenance and assembly and several safety features to provide top efficiency in all conditions.

laczniki napowietrzne

A complete range of modern gear designed according to the requirements of advanced, highly universal Smart Grid system. Our overhead connectors were developed to offer the highest reliability and durability over the years of their use in harsh conditions. As a result, the connectors, switch disconnectors, fuse bases and other gear requires minimum effort when it comes to regular control and maintenance.

Additional information